The Trajan 125 band saw is a versatile and efficient tool for cutting materials quickly and accurately. In this guide, we will discuss the process of installing a part stop for the Trajan 125 band saw, as demonstrated in the video by Tom Seagraves from Sawblade.com.

Why Use a Part Stop for Your Trajan 125 Band Saw?

A part stop is an essential accessory for the Trajan 125 band saw, as it allows users to consistently and accurately cut materials to the desired length. The part stop is ideal for both professionals and do-it-yourselfers who need to make precise cuts with ease.

Safety First

Before you begin installing the part stop, always ensure that your band saw is unplugged to prevent any accidents or injuries.

Steps for Installing the Trajan 125 Part Stop

Follow these simple steps to install the part stop for your Trajan 125 band saw:

Attach the rod to the base: First, take the rod with the bolt and screw it into the base just below where the blade is located. Use a 19-millimeter wrench to tighten the bolt securely.

Slide the stopper onto the rod: Next, slide the stopper onto the rod. Take the bolt and feed it into the stopper, ensuring that the threads face upward. This will allow the arm to screw in correctly.

Set the desired cutting length: The Trajan 125 part stop has a 10-inch capacity. To measure the cutting length, always start from the blade and measure up to the stopper. In the video, Tom sets the cutting length to 7 inches.

Insert your material and start cutting: Open the vise, place your material inside, and ensure that it butts up against the stopper. Close the vise, and you’re ready to start cutting.

Conclusion

The Trajan 125 band saw part stop is an invaluable accessory for those who need to make accurate cuts quickly and efficiently. By following the steps outlined in this guide and demonstrated in the video by Tom Seagraves, you’ll be able to install your part stop with ease and start making precise cuts in no time.

Remember to visit Sawblade.com for all your cutting needs. No middlemen, no markup, no problem – go direct.